Alapul az Aero-Naut kittje szolgál , melyben valószínű gazdasági okok miatt a test felépítése teljes mértékben megegyezik a Diva hajótestével, ellenben az ülés és kormánykerék méretéből adodóan a modell léptéke ennek csak a fele.Erre is elmondható, hogy szerelési útmutatón kivül semmilyen tervrajzot nem mellékeltek a kitthez ...Ezt a modellt elvileg RC-nk készítették. Mint a Diva esetében is, a vízzárás pocsékul van megoldva igy ez továbbra is fejtőrést okoz.Sokat gondolkodtam egy megfelelő megoldáson .Classic Runabout Riviera
Másik említhető gond, hogy annak idején ezek a gyorsjáratú motorcsonakok bizony rengeteg krómozott élvédővel és alkatrésszel voltak felszerelve. A kitthez a kötélbakokon kivül, ebből semmit sem mellékeltek. Nem csináltam még ilyen hajót, nincsen tapasztalatom ezen alkatrészek készítéséről, próbálok rájönni miből is tudnám ezt megoldani. Talán sikerül - majd meglátom.Másik jellegzetessége ezen hajóknak a tükörlakkozás. Ezt szórópisztoly nélkül, csak ecsettel, bizony nehéz létrehozni.
A fedélzeten 8 réteg yacht lakk található + 2 réteg kétkomponensű autólakk majd kézi polirozás. Az eredmény majd látható.
Ezt még tanulni kell.
Az oldallemezek 4 x voltak félolajjal beereszteve + 2 réteg parketta alapozó + a lakkrétegek.
A fenék dettó.
Construction of a classic runabout from 1960's
About the model
It is based on the Aero-Naut kit, in which, probably for economic reasons, the hull construction is exactly the same as that of the Diva, whereas judging by the size of the seat and the steering wheel the scale of this model is only half of that. Here too it can be said that apart from assembly instructions no plans were supplied with the kit...In principle this model was made for RC. As with the Diva, the waterproofing is dreadfully done, so it remains a headache.I thought a lot about a suitable solution.Classic Runabout Riviera
Another problem worth mentioning is that in their day these fast motorboats were fitted with a great many chrome-plated edge trims and fittings. Apart from the cleats, none of these were supplied with the kit. I have not built a boat like this before and have no experience in making such parts; I am trying to work out what I could make them from. Perhaps I will manage; we shall see.Another characteristic of these boats is the mirror-finish varnish. Without a spray gun, with a brush alone, that is hard to achieve.
The deck has 8 coats of yacht varnish plus 2 coats of two-component car lacquer, then hand polishing. The result will be seen.
This still has to be learnt.
The side panels were treated 4 times with thinned linseed oil, plus 2 coats of parquet primer, plus the coats of varnish.
The bottom likewise.